Grouting Adhesive Steel Glue
Keywords:
Grouting Adhesive Steel Glue
Categories：
Description
Products
Junteng infused adhesive steel adhesive is a kind of special adhesive suitable for fixing steel components first, and then infused adhesive steel. In the formula design creatively synthesised the excellent adhesive properties and the convenient process performance of infusion construction. After curing at room temperature, the adhesive layer on the steel plate and the substrate has excellent adhesive properties and physical and mechanical properties. Even if the substrate is slightly damp, it can be constructed and cured as usual.
Product Features
Its viscosity is low, and the slurry fluffing process is simple.
High strength, anti-aging, good resistance to media (acid, alkali, water).
Good toughness and impact resistance.
Curing at room temperature, small shrinkage in hardening process.
Does not contain volatile solvents, safe and non-toxic, convenient construction.
Scope of Application
Concrete components wet outsourcing steel plate reinforcement, bridges and other components external large-area steel plate grouting adhesive steel reinforcement.
Concrete cracks ( 1-5mm), internal defects (honeycomb, holes) grouting repair.
Secondary grouting of foundation bolts and equipment base plates.
Proportion of Glue
Group A and B dispensing rubber ratio 3:1
Workflow
Concrete surface preparation - steel plate fixing with venting holes - edge sealing - adhesive dispensing - grouting - curing - inspection
Drilling holes in steel plates and concrete
Drill holes for fixing bolts on the steel plate, generally 6-7 bolts per square setting, and drill holes for fixing bolts at the corresponding positions in the concrete;
Surface treatment
Steel plate put to death concrete paste surface should be carefully surface treatment, steel plate for rust removal, grinding treatment; concrete bonding surface grinding treatment;
Fixed steel plate
Hang the steel plate on the bolt, tighten the nut, in order to control the thickness of the adhesive layer, can be stuffed around each bolt hole with a certain thickness of gasket;
Leave air venting holes
Insert a hose as an air vent every 0.5 metres around the perimeter of the grouted adhesive surface, and only set air vents at the top edge when installing inclined or vertical steel plates;
Caveat
Wear gloves, masks, goggles, helmets and other protective equipment during construction.
If accidentally get on skin or clothes, use alcohol and plenty of water to rinse.
If accidentally consumed or splashed into the eyes, seek medical attention immediately.
Packaging, Storage and Transport
28kg/group (Group A 21kg, Group B 7kg); 12kg/group (Group A 9kg, Group B 3kg.)
16kg/group (including sand) (12kg for group A, 4kg for group B.)
This product is non-toxic, non-dangerous, transported as general chemical building materials.
It should not be exposed to sun, rain, inverted and damaged package during transport.
The product should be stored in a cool (5-25℃) and dry warehouse away from light, with a storage period of 12 months, beyond the storage period, it can still be used after the test performance is qualified.
Product Message
Add WeChat
24-hour service hotline:
Address: Shandong Province, Dezhou City Economic and Technological Development Zone, Project East East Chongde 11 Road East