Sticky steel glue-Junteng Material

Home page

Sticky steel glue

Junteng steel adhesive is A and B two-component modified epoxy structural adhesive. It is suitable for seismic reinforcement of various buildings, and has excellent performance in self-adhesion and mutual adhesion of steel plate and concrete.

Keywords:

Sticky steel glue

Categories：

Hotline ：

WhatsApp ：

Description

Products

Product Features

High strength, anti-aging, good resistance to media (acid, alkali, water).

Good toughness and impact resistance.

Curing at room temperature, small shrinkage in hardening process.

Does not contain volatile solvents, safe and non-toxic, convenient construction.

Scope of use

Reinforcement of concrete elements with adhesive steel plates in building structural renovation works.

Self-adhesion and mutual adhesion of metal, non-metal and various polymer materials in construction projects.

Various kinds of building structure reinforcement, wall floor, beams and columns, etc. viscous steel reinforcement.

Proportion of glue

Ratio of dispensing rubber for groups A and B: 2:1

Workflow

Scribe lines to identify areas where steel needs to be glued;

Chisel off the stucco layer on the concrete surface and drill, descale and polish the steel;

Cleaning: blow out the floating dust on the surface with compressed air and clean it with acetone;

Batching: weigh and mix in the drum according to the weight ratio of A:B=2:1;

Apply structural adhesive: mix the above adhesive, evenly over the concrete surface or steel surface, and shall not be mixed with air bubbles;

Anchoring: attach the steel plate directly to the concrete surface coated with steel adhesive, remove the excess adhesive from the periphery and fix it with a steel frame;

Maintenance: after fixing, carry out maintenance at room temperature for not less than 24 hours.

Caveat

The construction environment is ventilated and dry, and the concrete surface is clean and free of oil.

Wear gloves, masks, goggles, helmets and other protective equipment during construction.

If it accidentally gets on the skin or clothes, it can be cleaned with industrial alcohol and plenty of water.

If accidentally consumed or splashed into the eyes, seek medical attention immediately.

Packaging, Storage and Transport

30kg/group (Group A 20kg, Group B 10kg.)

This product is non-toxic, non-dangerous, and transported as general chemical building materials.

It should not be exposed to sun, rain, inverted and damaged packaging during transport.

The product should be stored in a cool (5-25) and dry warehouse away from light, with a storage period of 12 months, and can still be used after passing the test beyond the storage period.

Product Message

Submit Now